Neoline E-Ride

Neoline E-Ride is a scooter companion app that enables Bluetooth control and real-time ride monitoring.

Neoline E-Ride helps riders of Neoline T23, T24, T25, T26, T27, and T28 scooters connect and monitor the scooter in daily use. Once paired over Bluetooth, you can view ride status, check power levels, and adjust core settings before you go and while you travel. As a result, it supports safer parking and more predictable speed control for city trips. To get started, install the Neoline E-Ride APK and pair your scooter to keep essential information within reach.

Core controls and safety tools

After pairing, Neoline E-Ride displays battery level, current speed, and total mileage in one place. You can plan charging and decide routes based on remaining range. The dashboard updates as you ride so trip decisions stay current.

From the same screen, you can switch speed modes to match road conditions. Neoline E-Ride lets you adjust higher speed behavior to fit crowded paths or open streets. Changes take effect on the scooter after confirmation.

When parked, use the remote lock to block the scooter from use. This helps deter unauthorized rides and adds a layer of parking security. You can unlock again once you return.

If you prefer a steady pace, enable cruise control in the current mode. The scooter maintains its maximum speed for the chosen mode without holding the trigger. This reduces manual input during longer stretches.

For supervised family use, children’s mode limits speed to 12 km/h. Neoline E-Ride keeps the restriction active while connected so learning rides stay controlled. Parents can disable the mode when conditions change.

Neoline E-Ride compatibility and model support

Neoline E-Ride works with Neoline scooter models T23 to T28. Feature availability can vary by hardware and firmware, and some production batches from 2020 to 2021 may not support every function listed. If a control is not visible after pairing, your unit may be from a batch with limited feature support. Check the model label and firmware details on your scooter to align expectations before adjusting settings.

Bluetooth pairing notes

For reliable pairing, keep the scooter powered on and stay within close range during setup. The phone should have Bluetooth enabled, and Location access may be required for scanning nearby devices. If connection attempts fail, restart the scooter and the app, then try again in an area with minimal wireless interference. Once connected, status updates and controls will sync to the phone in real time.

Data practices at a glance

The developer indicates that the app does not collect user data and does not share data with third parties. This scope applies to the app’s core functions and connection process.

How to set up Neoline E-Ride on your phone

To begin, download Neoline E-Ride on your Android phone and turn on your scooter. The app pairs over Bluetooth to show status and enable core controls. After setup, you can manage speed and parking security from the phone.

1. Enable Bluetooth and Location on the phone, then open Neoline E-Ride and grant any permissions requested.
2. Turn on the scooter and keep it nearby. In the app, select your model and start the pairing process.
3. When connected, confirm that battery level, speed, and mileage appear on the dashboard.
4. Next, switch the speed mode as needed and set cruise control if you want steady travel on longer stretches.
5. Finally, lock the scooter when parking and turn on children’s mode when a supervised rider needs speed limits.

Start using Neoline E-Ride today

Neoline E-Ride groups essential ride data and core safety tools for supported scooters. For a straightforward setup, install the Neoline E-Ride latest version and pair your scooter to manage modes, cruise, and locking in one place.

For support and model details, use the following official resources:

• Official support site: https://neoline.com/support/
• Support email: [email protected]